First, the installation tool

To install a post-modern ceiling light, we must first prepare the required installation tools, such as impact drills, electrician pliers, screwdrivers, insulating tape, a small piece of wood, and a wooden ladder.

Second, choose a location

The first thing to do after installing a modern ceiling light is to determine the position of the rear modern ceiling light. Straight incandescent or fluorescent lamps should be mounted towards the front of the cabinet. In this way, part of the light from the lamp is directed at the tailgate and then reflected onto the console and then towards the center of the space.

Third, the modern ceiling lamp cover after the demolition

Remove the mask of the post-modern ceiling lamp, remove the mask and then remove the lamp. In general, the poster of the modern-style ceiling lamp has two fixed ways of rotation and snap-on. To prevent the lamp from being broken during installation.

Fourth, the installation base

First, we put the previously reserved wire into the wire hole of the base. Hold the base of the post-modern ceiling lamp with one hand and place it in the position to be installed. Then use a screwdriver to screw one of the screws into the empty position. Don't screw it too hard, so that it can be moved when the position is not accurate, and it will be placed correctly after the inspection position.

Fifth, connecting wires

After fixing the base, you can connect the power cable to the terminal block of the post-modern ceiling lamp. It should be noted that the two wires connected to the power cable of the post-modern ceiling lamp should have good electrical contact, and also use black tape separately. Wrap it and keep it at a certain distance.

Sixth, the installation of the mask

Install the mask, charm, and after connecting the wires, try to power on. If everything is normal, you can turn off the power supply and install the mask of the modern ceiling lamp.